Every vehicle using public roads in Ontario must have a legal license plate. Drivers are required to carry proof of insurance as well as the vehicle permit for the vehicle being driven.

Use the left tire track. This ensures other drivers on the road can see the motorcycle clearly and will help keep them from entering the lane in which the motorcyclist is driving.

It is important to maintain proper posture on the motorcycle in order to steer properly and maintain balance and speed. Low placement of the wrists ensures speed is not increased mistakenly; it also enables the rider to reach the front brake lever more effectively.

Always follow the rules of the road when attempting to pass other vehicles. Do not attempt to pass when oncoming traffic is too close to pass safely. Be sure to accurately judge the time and distance required to safely pass other vehicles.

Regular checks and repair of these parts, which can wear out over time, will help drivers avoid accident or injury. Drivers should also check the coolant and the battery of the motorcycle on a regular basis, depending upon the make of the motorcycle.

To ensure safety, always stop a good distance - 5 metres at least - from the train tracks when the barrier is down and/or the lights are flashing. Motorcyclists should never attempt to cross around or under gates that have been lowered for an approaching train. Motorcyclists must drive on only after the gates have been raised and it is safe to do so.

Motorcyclists should always adjust lane position according to road conditions. When driving around a blind curve, keep an eye out for slick spots, road ruts, debris or bumps.

A motorcycle training course designed and/or authorized by the Ministry will ensure new drivers learn the necessary skills and develop the know-how to drive safely. Most courses provide the Level 1 exit test as part of the course and reduce the length of time needed at the M2 level.

If these steps are not followed correctly, the motorcycle will most likely not start. Once the engine starts, a motorcyclist should change to first gear keeping feet on the ground. Apply the throttle slightly, releasing the clutch slowly as the motorcycle begins to move forward. Move feet to the footrests, continue to release the clutch, and accelerate as needed to drive forward. Shift to second gear using the clutch and throttle appropriately when the motorcycle reaches the correct speed.

Motorcyclists should always apply both brakes smoothly at the same time. This ensures safer, more efficient stopping. Do not apply the brakes in a sudden, jerky manner.