If these steps are not followed correctly, the motorcycle will most likely not start. Once the engine starts, a motorcyclist should change to first gear keeping feet on the ground. Apply the throttle slightly, releasing the clutch slowly as the motorcycle begins to move forward. Move feet to the footrests, continue to release the clutch, and accelerate as needed to drive forward. Shift to second gear using the clutch and throttle appropriately when the motorcycle reaches the correct speed.

Always follow the rules of the road when attempting to pass other vehicles. Do not attempt to pass when oncoming traffic is too close to pass safely. Be sure to accurately judge the time and distance required to safely pass other vehicles.

Motorcyclists need to use their mirrors properly to ensure they are aware of their surroundings. Mirrors help motorcyclists see traffic around them, giving them greater safety. Motorcyclists should check mirrors every 5 to 7 seconds. Even after checking the mirrors, it is important for motorcyclists to do a shoulder check to visually confirm the traffic situation in advance of any action, be it turning, slowing down, changing lanes and so on.

The Ministry of Transportation authorizes inspection stations to examine and verify motorcycles. The Safety Standards Certificate is documented proof that the vehicle has passed the inspection. The certificate is valid for 36 days.

Motorcyclists should always adjust lane position according to road conditions. When driving around a blind curve, keep an eye out for slick spots, road ruts, debris or bumps.

Always follow the rules of the road. However, make sure you can travel the right of way safely.

Black ice is so named because the ice forms such a thin layer that it can't be seen even on the black asphalt. It builds everywhere, but especially on bridges. This happens because bridges are prone to severely cold air from below and the drastic drop in temperature causes a thin layer of ice to form.

Positioning the motorcycle across the parking spot helps ensure that the motorcyclist has a good view of the road and that the motorcycle is visible to other vehicles on the road, especially if the road has numerous cars parked on both sides.

Reduce speed when approaching an object or pothole and maintain a firm grip on the handlebars to ensure that the motorcycle stays upright and does not turn. While raising yourself, it is essential to grip the handlebar firmly so that your hands do not slip.

Applying forward pressure on the handlebar of the turning side causes the motorcycle to lean while pushing on the other handlebar and applying the throttle causes the motorcycle to straighten and finish the turn.